At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Palmetto State Armory — AR15 Lower Receiver, $49.99
⏺ Amazing Deal on quality AR lower receiver
Do you need a quality, affordable lower for your next black gun build? Here’s a great deal. Palmetto State Armory (PSA) now has stripped AR15 lowers for just $49.99. With this lower as the core, you can build up your AR for any discipline you choose: 3-Gun rifle, competition service rifle competition, varmint rifle, or even “race gun” for the PRS Gas Gun Series. These PSA lowers are forged using 7075-T6 Aluminum and have a durable, mil-spec anodized hardcoat finish.
2. Sportsman’s WH — Rangefinders on Sale, Save up to 34%
⏺ Major discounts on Leupold, SIG Sauer, and Vortex Rangefinders
3. Stocky’s Stocks — Quality Carbon Fiber Stocks on Sale
⏺ Excellent stocks for varmint and hunting rifles — strong and light
Would you like a modern, high-tech carbon fiber stock for your next hunting or varmint rifle project? Stocky’s Stocks is running a major sale on UltraLite Carbon Fiber VG2 Rem 700 Stocks, UltraLite Carbon Fiber Hunter Rem 700 Stocks and UltraLite Carbon Fiber M50 Rem 700 Stocks. With a selection this big you’re bound to find one that fits your needs. These stocks are strong, light, and durable.
4. Palmetto SA — SIG 3-9x50mm Scope + Laser RF, $179.99
⏺ Scope and rangefinder for hunting — combo for under $200
Here’s a good, ultra-affordable scope/LRF combo for a hunter on a tight budget. The Buckmasters Scope and Rangefinder Combo offers advanced SIG Sauer electro-optics for just $179.99. The 3-9x50mm scope has a Bullet Drop Compensation (BDC) reticle with holdover dots. The SIG Sauer LRF 1500 Laser Rangefinder offers fast-ranging performance with red illuminated display for low light hunting. If you don’t need a scope, you can get the Buckmasters 1500 Laser Rangefinder for just $119.99, an amazing deal.
5. Walmart — Fingerprint Access Gun Safe, $149.99
⏺ 50% Off price on Rapid Access Gun Safe (fingerprint, keypad, key)
Need to store a few rifles or shotguns with secure yet rapid access? Consider this 5-Gun Safe with Fingerprint Access. With a $299.99 MSRP, it is now just $149.99 on sale. It has five locking bolts on the door sides plus an internal locking compartment. Sized 13.8″W x 11.8″D x 57″T, this 74-lb safe can hold multiple long guns and pistols, along with other valuables. The main door can be opened instantly with fingerprint recognition, or use the digital keypad (there is also an emergency keyhole). The interior has foam barrel holder and carpeted floor, plus three pistol pouches on the door. NOTE: We do NOT recommend this as a primary gun safe, but it can be a good secondary safe.
6. Palmetto SA, Blackhawk Shooting Mat/Rifle Case, $49.99
⏺ Multi-Function Shooting Mat/Rifle Case now $100 Off
Here’s a great deal on a multi-function Mat/carry case. The Blackhawk Stalker Drag Mat Carry Case functions as a nice padded shooting mat, AND it serves as a rifle carry case and drag bag. Length is 50.5″ and width (in rifle case mode) is 9″. This mat/case is made from durable 1000 denier nylon and closed-cell foam. It has carry straps plus a shoulder strap.
7. Powder Valley — 2500 RUAG SmR Primers, $177.99
⏺ Great price on high-quality primers
If you shoot benchrest rigs, varmint rifles, or ARs, you need small rifle (SR) primers. Now you can get some very high-quality German-made RUAG SR Primers for a mere $177.99 for 2500. That’s the equivalent of $71.20 per thousand. These RUAG #4033 primers have earned positive user reviews: “Excellent quality… they performed very well… would recommend these to anyone”. NOTE: These are mil-spec primers with a fairly hard cup.
8. Midsouth — Poly-Tipped Bullet Sale, 17 to 23 Cents Each
⏺ Good, budget-priced bullets for varminters, AR15 Shooters, and hunters
If you need good bullets for your .223 Rem, 22 BR, or 22-250 varmint rig, here is a great opportunity. Get 55gr or 75gr polymer-tipped bullets at super-low prices, starting at just $41.99 for 250 — just 17 cents each. There are also 110gr .30 caliber bullets at $56.99/250 that can work for small game, or even local club matches. These deals are all on 250-count lots. CLICK HERE for Poly-tip Bullet Sale at Midsouth.
9. Amazon — Dragon AR500 Steel Targets, $16.99 and Up
⏺ Good prices on strong versatile AR500 steel gongs, 4″, 6″, 8″, 10″, 12″.
Shooting steel is fun — you get instant gratification from hearing the “clang” and seeing the gong swing. Shooting steel is also good practice for PRS/NRL events and ground-hog matches. Right now, you can get some great deals on quality AR500 steel targets. These Dragon Target Gongs (#ad) start at just $16.99 for a 4″-diameter, 3/8″-thick gong. Larger 6″, 8″, 10″, and 12″ gongs are offered in 3/8″ and 1/2″ thicknesses, and a 3-pack of 8″ gongs is available. A 6″-diameter gong is $26.99 (3/8″ thick) or $32.99 (1/2″ thick). The largest 12″-diameter gong in the heavy 1/2″ thickness is $76.99. NOTE: All these Dragon gongs have a center hole allowing more hanging options.
⏺ Sophisticated wind speed meter at a super-affordable price
Knowing wind speed is critical to making accurate ballistic adjustments both on the line or in the field. If you need a reliable yet affordable wind speed meter, consider the BTMETER BT-100 Handheld Anemometer (#ad). The BT-100’s multi-function capabilities include Wind Speed, Wind Temperature, and Wind Chill factor. The BT-100 portable wind speed gauge can accurately measure wind velocity in 5 units: m/s, km/h, ft/min, knots, mph. The unit also records air temperatures in degrees Celsius and Fahrenheit.
As an Amazon affiliate, this site can earn revenues through sales commissions.
Share the post "BargainFinder 450: AccurateShooter’s Deals of the Week"
President Donald J. Trump will address NRA Members the 2024 NRA-ILA Leadership Forum.
Former U.S. President Donald J. Trump will appear at the 2024 NRA Annual Meetings and Exhibits in Dallas, Texas. Mr. Trump will be the keynote speaker at the 2024 NRA-ILA Leadership Forum on Saturday, May 18th. The Forum starts at 2:00 pm on the 18th. This marks President Trump’s ninth NRA appearance, reaffirming his strong commitment to the NRA, the Second Amendment, and American firearm ownership.
Event Starts at 2:00 PM – Doors Open at 12:00 PM. Admission is free and will be first come, first served. Tickets are not required but you must be an NRA Member to attend. You may start lining up at 11:00 AM.
President Trump, an NRA Life Member, first addressed the NRA in Nashville in 2015. Since then, he has been a steadfast advocate for the NRA, the Second Amendment, and self-defense rights. In 2016 he promised to never let NRA members down.
As President, Trump made good on that promise by appointing federal judges who respect the Second Amendment, including three Supreme Court justices who played a pivotal role in landmark Second Amendment rulings such as NYSRPA v. Bruen.
Randy Kozuch, Executive Director of NRA-ILA, added, “President Trump’s presence at the NRA Annual Meetings is a powerful sign of his ongoing commitment to our constitutional freedoms and the [NRA’s] efforts to protect and advance the Second Amendment rights of every law-abiding American.”
The 2024 NRA Annual Meetings & Exhibits includes three days of free seminars and special events. On display in the 14-acre Exhibit Hall are the latest guns and gear from leading suppliers. In addition, hunting outfitters will promote their services. The event takes place at the Kay Bailey Hutchison Convention Center, 650 South Griffin Street, Dallas, TX 75202.
Share the post "President Trump Will Speak May 18 at NRA Meetings in Texas"
Small patches are not very efficient at distributing bore cleaning liquids inside your bore. The problem with a tight-fitting patch is that the solvent gets squeezed off in the first few inches. You can switch to a smaller jag, or a bore mop, but there is an even better way to get an ample amount of solvent in your bore. Just spray directly into the bore with a wash bottle, an inexpensive plastic bottle with an L-shaped dispensing neck, tapered at the end.
When using the wash bottle, you can either just plug the breech and spray from the muzzle end (where most copper fouling is), or, alternately, put the wash bottle neck directly in the chamber and spray forward. When spraying from the chamber forward, you may need to use a rubber O-Ring to seal off the action… depending on the bore size and the particular wash bottle’s neck spout diameter. We prefer to plug the breech and squirt from the muzzle.
Bottle Solvent Application Method Works Great for Smaller Bores
Using wet patches or wet brushes is an inefficient way to really saturate the tight bores of 17s, 20s, and 22s. Even with a cotton bore mop, most of the solvent will be squeezed out before it gets to the end of the bore, where most copper fouling occurs. For these smaller 17, 20, and 22-caliber bores, you can just take the wash bottle and stick the tapered nozzle right in the chamber. The tapered end will press fit in the throat, sealing off the chamber. With the barrel slightly nose-down, give the bottle a couple good squirts until the solvent mists out the muzzle. In just a few seconds, this will put more solvent in the bore than a half-dozen wet patches.
A solvent-filled wash bottle is also handy for wetting your brushes. It’s much easier to saturate a bore brush (without spilling solvent on your stock), by using the wash bottle. You can get wash bottles from USPlastic.com, Amazon.com, or lab supply stores. CLICK HERE for $4.98 wash bottle.
Share the post "Speed Up Bore Cleaning Tasks with Wash Bottles"
Detail from Doan Trevor rimfire prone stock (Fiddleback Walnut) with Stiller 2500 X Action.
New Mexico Gunsmith Doan Trever is a true wizard with wood. At Doan Trevor Custom Rifle Building, he crafts stunning figured wood stocks, and also builds complete wood-stocked and fiberglass-stocked rifles that shoot as good as they look. Doan is a true master, with a mind for function and an eye for beauty. The ability to hand-craft wood is becoming a lost art. For this Sunday, we celebrate four projects crafted by Doan: two complete rifle, a special F-Class stock built for multiple actions, and an F-TR stock for a Sako action. Visit DoanTrevor.com to view find dozens of other stunning stocks and complete rifles.
Mausingfield America Rifle with English Walnut Stock
Doan told us: “This is a highly figured piece of English Walnut with burls and flowers. Along the bottom of the stock there’s a burl/flower that looks like an owl and one side looks like the Sandia Mountains. This rifle is in 30 PCR. Doan adds: “The owner is enjoying this rifle immensely.”
Walther KK500 (Twin Trigger), English Walnut Laminate Stock with Fiddleback Accents
About this unique rig Doan notes: “This left-handed rifle has two triggers. It has an electronic trigger AND a mechanical trigger. With the wood stock option, the charging cable needs to be modified modify in order to clear the trigger extension to be able to charge. Also, keeping with aesthetics, I made it able to remove the trigger guard in order to charge more easily. Removing the trigger guard does not change the bedding.”
American Walnut F-Class Stock with Figured English/Claro Walnut Fore-End Inlay
Doan explains: “The owner has three actions with the same barrel block mounting system. He wanted to be able to use one stock. I built a bedding system that would accomplish this task. The two pieces of Claro Walnut on the fore-end are mirror copies.”
F-TR Stock for Sako 85 with Johnny Byer Stock Blank
Here’s a handsome F-TR rig. Doan reports: “The pistol grip cap is a piece of Screw Bean Mesquite Wood from my old front yard in Albuquerque. (I live in Rio Rancho, NM now.) Take a look at the bottom photo with the blue background, the rifle doesn’t have any stippling yet. Sometimes, you have stippling as the last step. There’s no room for error when this order of events is necessary.”
Doan Trevor is a master gunsmith and stock-maker who works in the old style. He still hand-crafts stocks from start to finish, and does all the metal-work on the custom rifles he builds. Starting with highly-figured woods, Doan carves and shapes his stocks largely by hand, with meticulous attention to detail. Each rifle he builds is optimized for its intended discipline, and custom-fitted for the customer.
With photography by Doan’s talented wife Sue, Doan has created a website, DoanTrevor.com, that is a feast for the eyes. You can see beautiful wood-stocked rifles being hand-crafted. Doan also illustrates how he creates custom metal parts, and how he beds barreled actions into the finished stocks.
Definitely visit Doan’s website. Be sure to click on the site’s secondary pages: Rifle Building, Woodworking, and Metalworking. There you’ll find info on wood-working plus hundreds of high-quality photos.
Contact Doan Trevor
Doan Trevor Custom Rifle Building
Website: DoanTrevor.com
Email: doantrevor@gmail.com
Phone: 714-457-5566
Products and Services: Custom rifle building for High Power, F-Class, Long Range, and Smallbore shooters. Fancy Wood and Fiberglass Rifle Stocks, Custom Grips for Rifles, and Offset Sights.
Share the post "Sunday Gunday: Master of Wood — Doan Trevor Custom Rifles"
There is a good article on gun safes in SHOT Business, a publication for the NSSF SHOT Show audience. Written by Christopher Cogley, this Safe Spaces Article offers some very important things to consider when purchasing a gun safe. Here are key points from that article:
Safe Security — The security of a gun safe comes down to two main factors: the thickness of the steel and the construction of the safe. When it comes to construction, look for a safe that has continuous welded construction instead of bolts or spot-welding, which are easier for trained gun thieves to cut through with torches or high-power saws.
Lock Options — Traditional combination locks are arguably the simplest choice. The downside, though, is they don’t provide quick access to firearms in an emergency. Electronic and biometric keypads provide quicker access — but be sure to replace the batteries every year.
Fireproof Rating — Aside from theft, the biggest threat to your firearms is fire. Unfortunately, the fireproof rating on gun safes can be confusing because there is no single, “standard” fireproof rating. As a general rule, the fireproof rating states how long a safe can be exposed to a fire of a particular temperature and maintain a temperature inside the safe of no more than 350 degrees F. To put this in context, the average house fire creates temperatures between 800 and 1,200 degrees F.
Where to Place a Gun Safe in Your Home
The Safe Spaces article includes advice from Stephen Hall, CEO of Lock It Up Safes. Hall addressed the question: “Where should I put my safe?”
Hall states: “Ease of installation should NOT be the foremost consideration when making this decision. Putting a safe in the garage has both pros and cons. We see some retailers recommend the garage solely because they don’t have the right team on board to install safes in other locations, and wheeling one into the garage is the easy way out.
Putting a safe in the garage is fine if that is the only place you an put it, but most want the safe in the home, where they can get to it quickly. Temperature and humidity are important considerations as well, and both are more easily controlled in a house rather than in the garage.
One advantage to garage installation is the concrete floor provides a solid base for safe installation. Houses built on concrete slabs also offer a solid anchor on the first level. If the safe needs to go to an upper floor, the weight of the safe and its contents need to be factored in.”
Place Safe Against Outside Wall
Hall recommends placing your gun safe against an outside wall: “In case of fire, the safe will typically last longer as there is not a lot that can burn on one side of the safe, thus keeping it cooler.”
Don’t Make the Mistake of Buying an Undersized Safe
The most common mistake people make when buying a gun safe is getting a safe that’s too small. This video explains why you should probably invest in a bigger safe. First, the rated gun capacity is exaggerated — rifles with mounted optics, long barrels, wide forearms and/or pistol grips take up considerably more space than a small rimfire rifle or a lever gun with iron sights. Second, your gun collection will likely grow in years to come. Third, you may want to store other valuables in the safe — such as vital documents, jewelry, watches, and pricey electronics. In this video the host notes: “Get a much larger safe than you think you’ll need at first. This will guarantee that you will have enough room for future purchases and all the guns and equipment you currently have.”
Recommended Safe Features for Long-Gun Storage
Editor’s Recommendation:
Budget $1200-1500 for a safe from a major maker, with external hinges, and an interior at least 58″ high. That gives you room for 30″-barreled rifles with a top shelf for handguns and other valuables. A rotary rack and slide-out drawers are great additions.
Keypad or Dial? We favor rotary dial locks. With minimal maintenance they will function flawlessly for decades. But the digital locks offer quick-access and convenience. If you go digital, get a commercial-grade unit.
Fire-lining is worth getting, but a thin layer of sheet-rock doesn’t make a safe truly “fire-proof”.
Interior at least 58″ High and 30″ wide Overall Weight 750+ Pounds 8 Gauge or Heavier Wall Thickness Double-Wall, Composite Door with Relockers Minimum UL RSC Rated. TL-15 or TL-30 Rating is Desirable External Hinges
Mechanical UL Group II (or better) Lock with Standard Dial Or UL Type 1 Commercial-Grade Electronic Lock
Custom Interior Suitable for Scoped Guns with Long Barrels On-Door Storage System for Non-scoped Long Guns OR Rotary Gun Rack for Scoped Rifles and ARs
Internal (sandwiched) Insulator, Reinforced if Sheet-rock Palusol? Heat-Activated Expanding Door Seals
Slide-out Drawers for Handguns Fire-lined Inner Safe for Paper and Media
Low Gloss, Rust-resistant External Finish Pre-Drilled holes for Lag Bolts and in Rear for Electric Cord Overhead Fluorescent Lamp and/or LED Mini-lights on Strings
Share the post "Gun Safes: Key Things to Consider — Size, Locks, Steel Thickness"
If you hand-load pistol ammunition, you should definitely have a case gauge (aka “gage”) for each cartridge type you reload. Caliber-specific, precision-machined cylindrical gauges perform many important functions. They will instantly reveal if your rounds are too long or have excessive headspace. They will also show if your case is bulged or otherwise too fat to chamber easily. You can use the gauge with sized brass as well as loaded rounds.
Case gauges are a “must-have” for anyone loading handgun ammunition, particularly if you crank out large quantities of pistol ammo with a progressive press. An oversize round can cause a misfeed, jam, or other problem. That can ruin your day if you are in the middle of a shooting match. If you are relying on your handgun for self-defense, the last thing you want is a malfunction of any kind. This Editor personally runs every pistol round through a gauge before it goes into the ammo box.
UltimateReloader.com Video Shows How to Use Pistol Case Gauges:
Our friend Gavin Gear of UltimateReloader.com has prepared an excellent video that explains the benefits of pistol case gauges and shows how to use them. Gavin uses the quality gages produced by L.E. Wilson. These are available for the most popular handgun cartridges, both autoloader cartridges, and rimmed revolver cartridges. Gavin demonstrates gage use with .40 SW and .44 magnum cases.
Gavin states: “Using a case gage is very simple, and I would recommend that you add one of these gages to your reloader’s tool chest for each of the pistol cartridge types you reload. It may just save you a lot of time and hassle. Peace of mind is hard to put a price on!”
There was huge news in the reloading world this week. Hodgdon Powder Company (Hodgdon) has acquired RCBS from Revelyst, a division of of Vista Outdoor (VSTO). Most operations of RCBS will remain in Oroville, California for now, and the full product line will stay in production — presses, dies, powder measures, case prep tools, priming tools, scales and more. But this is still big news, with a leading reloading gear maker being acquired by a leading powder maker/distributor.
Today’s Saturday Showcase feature some of the most popular and noteworthy RCBS products including single-stage, turret, and progressive presses, plus powder dispensers and other tools.
RCBS ChargeMaster Link Scale/Dispenser with Bluetooth
Having a modern, electronic powder scale/dispenser makes the hand-loading process vastly more efficient. The latest generation of powder dispensers are very accurate, and they can store charge settings for multiple cartridge types. The latest RCBS ChargeMaster Link dispenser has a modern interface, plus Bluetooth technology that “talks” to a handy App on your mobile device. This is available now for $299.99 at Cabelas.com.
RCBS Combo Kit — Good Choice for Getting Started in Reloading
You can definitely save money by buying multiple reloading gear items in one combo package. RCBS offers a variety of Reloading Combo Kits which feature reloading press, powder measure, scale, priming tool, and other items. These range in price from $265-$620 on Amazon. This video reviews an RCBS Rebel Master Kit. This is a very complete starter set-up, sold for $499.99 at Midsouth.
Along with the press, we like many of the components in the Rebel Master combo kit. The powder measure works well as does the trickler, and the hand primer tool is reliable, with good feeding and plenty of leverage.
RCBS Partner Press
We think all serious reloaders should have a small, secondary single-stage press for repetitive tasks such as decapping primers. In addition, a small, compact press can be transported easily to the range. Load development can be done more efficiently when loading at the range, as you can easily modify seating depth and other variables. The RCBS Partner Press (#ad) is a great choice for a secondary press. This UltimateReloader video shows the key features of the Partner Press.
RCBS 6-Station Turret Press — Operation Tips
This editor has owned and used an RCBS Turret Press for over two decades. While certainly not as versatile/sophisticated as the Area 419 XERO turret press, this six-station RCBS press does its job handily. It is a good choice if you load multiple pistol cartridges. With six stations, you can install both a sizing and a seating die for three different cartridge types, such as 9mm Luger, .357 Magnum, and .45 ACP.
RCBS Brass Boss Case Prep Center
The RCBS Boss is a powered case prep center that performs multiple tasks efficiently. Priced at $198.99 on Amazon (#ad), the RCBS Boss boasts six variable, high-speed rotating stations (four at <350 RPM; two at <550 RPM). This unit is great for initial case prep (chamfering/deburring) and regular brass maintenance.
RCBS Summit — Set-UP and Field installation on Vehicle
The RCBS Summit Press (#ad) is a very unique, small footprint press that operates differently than most reloading presses. The cast-iron Summit has a large-diameter center column and die moves up and down to meet the cartridge. With this small footprint, the Summit can be used in the field. As you can see in the second video, one of our testers actually mounted a Summit Press on his vehicle (with a special pedestal) so he could load anywhere.
RCBS Bench-mount Priming Tool (Two Short Videos)
If you need to prime large numbers of cases, the RCBS bench-mount Auto Priming Tool can do so efficiently at a modest cost (currently $155.09 on Amazon #ad). It attaches to your bench so it is secure and stable. A vertical tube holds dozens of primers that feed into the pusher as you can see in these videos. Older guys who experience pain when gripping hand primer tools have praised this bench-mounted RCBS unit.
Choosing a Case Cleaning System
Here Kent Sakamoto of RCBS looks at the three main types of brass cleaning systems: Vibratory Tumbler, Wet Tumbler (with media), and Ultrasonic Cleaning Machine. Kent reviews the pros and cons of each system. Most gun owners can benefit by having an ultrasonic machine for parts cleaning as well as a tumbler for cleaning fired brass.
As an Amazon affiliate, this site can earn revenues through sales commissions.
Share the post "Saturday Movies: RCBS Tool Videos (Hodgdon Now Owns RCBS)"
With barrels, one wonders “Can a little more length provide a meaningful velocity gain?” To answer that question, Rifleshooter.com performed an interesting test, cutting a .308 Win barrel from 28″ all the way down to 16.5″. The cuts were made in one-inch intervals with a rotary saw. At each cut length, velocity was measured with a Magnetospeed chronograph. To make the test even more interesting, four different types of .308 Win factory ammunition were chronographed at each barrel length.
This is a very useful test is you’re thinking about building a .308 Win hunting rifle, or perhaps thinking of going shorter for your F-TR rifle to save weight.
Test Barrel Lost 22.7 FPS Per Inch (.308 Win Chambering)
How much velocity do you think was lost, on average, for each 1″ reduction in barrel length? The answer may surprise you. With a barrel reduction from 28″ to 16.5″, the average speed loss of the four types of .308 ammo was 261 fps total. That works out to an average loss of 22.7 fps per inch. This chart shows velocity changes for all four ammo varieties:
Summary of Findings:
The average velocity loss per inch, for all four ammo types combined, was 22.7 FPS. By ammo type, the average FPS loss per inch was: 24.6 (Win 147 FMJ), 22.8 (IMI 150 FMJ), 20.9 (Fed GMM 168gr), and 22.5 (Win 180PP).
Interestingly, these numbers jive pretty well with estimates found in reloading manuals. The testers observed: “The Berger Reloading manual says for the 308 Winchester, ‘muzzle velocity will increase (or decrease) by approximately 20 fps per inch from a standard 24″ barrel’.”
How the Test Was Done
The testers described their procedure as follows: “Ballistic data was gathered using a Magnetospeed barrel mounted ballistic chronograph. At each barrel length, the rifle was fired from a front rest with rear bags, with five rounds of each type of ammunition. Average velocity and standard deviation were logged for each round. Since we would be gathering data on 52 different barrel length and ammunition combinations and would not be crowning the barrel after each cut, we decided to eliminate gathering data on group sizes. Once data was gathered for each cartridge at a given barrel length, the rifle was cleared and the bolt was removed. The barrel was cut off using a cold saw. The test protocol was repeated for the next length. Temperature was 47° F.”
CLICK HERE to Read the Rifleshooter.com Test. This includes detailed charts with inch-by-inch velocity numbers, multiple line charts, and complete data sets for each type of ammo. Rifleshooter.com also offers ballistics graphs showing trajectories with different barrel lengths. All in all, this was a very thorough test by the folks at RifleShooter.com.
Much Different Results with 6mmBR and a Longer Barrel
The results from Rifleshooter.com’s .308 barrel cut-down test are quite different than the results we recorded some years ago with a barrel chambered for the 6mmBR cartridge. When we cut our 6mmBR barrel down from 33″ to 28″, we only lost about 8 FPS per inch. Obviously this is a different cartridge type, but also our 6mmBR barrel start length was 5″ longer than Rifleshooter.com’s .308 Win start length (and we ended where Rifleshooter’s .308 started — at 28″). Velocity loss can be more extreme with shorter barrel lengths (and bigger cartridges). Powder burn rates can also make a difference.
Share the post "How .308 Win Velocity Changes with Barrel Cut from 28″ to 16.5″"
Coating bullets with a friction-reducing compound such as Molybdenum Disulfide (Moly) offers potential benefits, including reduced barrel heat, and being able to shoot longer strings of fire between bore cleanings. One of the effects of reduced friction can be the lessening of internal barrel pressures. This, in turn, means that coated bullets MAY run slower than naked bullets (with charges held equal).
To restore velocities, shooters running coated bullets are inclined to “bump up” the load — but you need to be cautious.
Be Careful When Increasing Loads for Coated Bullets
We caution shooters that when your start out with coated bullets in a “fresh barrel” you should NOT immediately raise the charge weight. It may take a couple dozen coated rounds before the anti-friction coating is distributed through the bore, and you really start to see the reduced pressures. Some guys will automatically add a grain or so to recommended “naked” bullet charge weights when they shoot coated bullets. That’s a risky undertaking.
We recommend that you use “naked” bullet loads for the first dozen coated rounds through a new barrel. Use a chronograph and monitor velocities. It may take up to 30 rounds before you see a reduction in velocity of 30-50 fps that indicates that your anti-friction coating is fully effective.
We have a friend who was recently testing moly-coated 6mm bullets in a 6-6.5×47. Moly had not been used in the barrel before. Our friend had added a grain to his “naked” bullet load, thinking that would compensate for the predicted lower pressures. What he found instead was that his loads were WAY too hot initially. It took 30+ moly-coated rounds through the bore before he saw his velocities drop — a sign that the pressure had lowered due to the moly. For the rounds fired before that point his pressures were too high, and he ended up tossing some expensive Lapua brass into the trash because the primer pockets had expanded excessively.
LESSON: Start low, even with coated bullets. Don’t increase your charge weights (over naked bullet loads) until you have clear evidence of lower pressure and reduced velocity.
Procedure After Barrel Cleaning
If you shoot Moly, and clean the barrel aggressively after a match, you may want to shoot a dozen coated “foulers” before starting your record string. Robert Whitley, who has used Moly in some of his rifles, tells us he liked to have 10-15 coated rounds through the bore before commencing record fire. In a “squeaky-clean” bore, you won’t get the full “benefits” of moly immediately.
To learn more about the properties of dry lubricants for bullets, read our Guide to Coating Bullets. This covers the three most popular bullet coatings: Molybdenum Disulfide (Moly), Tungsten Disulfide (WS2 or ‘Danzac’), and Hexagonal Boron Nitride (HBN). The article discusses the pros and cons of the different bullet coatings and offers step-by-step, illustrated instructions on how to coat your bullets using a tumbler.
Share the post "Safety Tip: Adjust Loads Conservatively with Coated Bullets"
The Shooting Sports USA website includes two excellent articles about the basics of metallic cartridge reloading. These two articles provide an excellent summary of the key procedures. If you are new to reloading, we recommend you read both articles:
Part II is particularly helpful because it explains the entire reloading process step-by-step, with 14 listed steps. The author notes: “In this, the second installment on metallic cartridge reloading, we’ll follow the sequence of steps involved in reloading a rifle cartridge and refining a metallic cartridge load. These steps are based on the use of a single-stage reloading press and a separate priming tool.”
Much important advice is provided as this article runs through the 14 Steps of Reloading. For example, when explaining Step 13, Bullet Seating, the article states:
“Proper seating depth is critical. Too much bullet protrusion and the cartridge may not work through the gun’s magazine, or it may fail to chamber. Too little and the bullet intrudes excessively into the powder chamber, decreasing volume and raising pressure. Neck tension is also important; any bullet that fails to seat with some resistance may be held only loosely by the neck and may be driven back into the case when the round is chambered, especially in semi-automatic arms.”
Important Guide to Detecting Over-Pressure Signs in Brass
As an example of the invaluable advice provided in these two articles, here’s a sample from Part II that explains how to determine if your load is over-pressure. We recommend that EVERY reader read this twice. There are more things to consider than a stiff bolt lift. You need to inspect cartridges very carefully:
Share the post "Step-by-Step Guide to Cartridge Reloading"
NRA Warns Against Booking and Advertising Scams at NRA Annual Meetings & Exhibits
The 153rd NRA Annual Meetings and Exhibits in Dallas, Texas takes place May 16-19, 2024. As the event draws near, the NRA emphasizes the importance of vigilance against predatory practices in the Tradeshow Industry. Exhibitors and attendees should be wary of various deceptive tactics, spanning from tradeshow services to hotel accommodations, attendee lists, and advertising claims. While some offers may be genuine, many are scams that could lead to financial loss without the promised services or outcomes. Some of the most common scams include:
1. Hotel Rooms/Fake Booking Agents: For the 2024 show, the NRA has partnered with ConferenceDirect as the Official Housing Partner for the Annual Meetings. Scammers may impersonate legitimate hotel representatives or housing bureaus, offering discounted rates to exhibitors and attendees. However, these offers often result in nonexistent reservations or subpar accommodations. CLICK HERE for official NRA Annual Meeting Hotel Reservation Site.
2. Advertising Sales: Scammers lure exhibitors with false promises of exposure through publications, event guides, or online platforms, exaggerating their reach and effectiveness. Some vendors misrepresent advertising channels and ROI, persuading exhibitors to purchase ad space based on misleading claims.
3. Attendee List Sales: Beware of scammers claiming access to comprehensive attendee lists and offering to sell this data to exhibitors. The NRA does NOT sell or distribute attendee lists for the Annual Meetings, so any such offer is a scam.
To avoid falling victim to scams, attendees should:
1. Only use NRA Official Partners
2. Exercise caution with unsolicited offers
3. Do NOT provide personal or financial information without verification
When in doubt, contact the NRA Shows and Exhibits Division to verify that offers or solicitations are from Official Partners. By remaining informed and vigilant, exhibitors and attendees can safeguard themselves.
MAP for Hutchison Convention Center Area in Dallas
Share the post "NRA Annual Meetings in Texas — Be Careful When Booking Rooms"
Here is big news for reloaders. RCBS, one of the leading producers of dies, reloading gear, case prep tools, powder dispensers, and reloading presses, has been acquired by Hodgdon Powder Company. RCBS has been operated by Revelyst, a division of of Vista Outdoor (VSTO). (SEE Revelyst Report on Yahoo Finance.) Here is the text from the official press release announcing the acquisition:
Hodgdon Powder Company Acquires RCBS Reloading
May 02, 2024
Hodgdon Powder Company is pleased to announce the acquisition of RCBS Reloading from Revelyst, a segment of Vista Outdoor (NYSE: VSTO). This acquisition is effective May 2, 2024, with Hodgdon prepared to immediately continue shipping RCBS products to wholesale and retail customers.
“This acquisition of RCBS, the leading brand in metallic reloading tools, is a perfect complement to our portfolio of smokeless powder brands for our handloading customers,” said Steve Kehrwald, president and CEO of Hodgdon Powder Company. With our world-class ballistics labs, we look forward to providing even more load data to our new RCBS customers.”
Hodgdon is thrilled to add the RCBS facility in Oroville, CA to our company-owned facilities in Shawnee, KS, Herington, KS and Miles City, MT. The addition of the RCBS team will more than double the headcount at the Hodgdon Powder Company and greatly expands the company’s manufacturing capabilities.
“For years, our friends have referred to the Hodgdon family and company as ‘The Gunpowder People’ and this acquisition further demonstrates our dedication to the handloader,” said J.B. Hodgdon, co-owner with his late brother Bob, of the Hodgdon Powder Company. “Our dad Bruce partnered with Fred Huntington from RCBS to conduct Reloading Roadshow events in the 1950s and 1960s. I believe they both are looking down today, proud to have our two great brands together in 2024.”
Comment from Vista Outdoor/Revelyst
“For more than 80 years, RCBS has demonstrated their manufacturing, innovation and operational excellence,” Said Eric Nyman, Co-CEO of Vista Outdoor and CEO of Revelyst. “We are thrilled for RCBS and their new ownership with Hodgdon Powder. This transaction joins two iconic brands, and it ensures that RCBS is positioned for success in the next chapter of its history.”
Hodgdon sent a letter today to its customers. In the letter, Hodgdon Sales V.P. Shawn Kelley states: “Hodgon Powder Company announced earlier this morning that we acquired RCBS from Vista Outdoor, effective immediately.” Shown above is the letter sent to customers.
Share the post "Major News — Hodgdon Acquires RCBS from Vista Outdoor"
Small patches are not very efficient at distributing bore cleaning liquids inside your bore. The problem with a tight-fitting patch is that the solvent gets squeezed off in the first few inches. You can switch to a smaller jag, or a bore mop, but there is an even better way to get an ample amount of solvent in your bore. Just spray directly into the bore with a 
Detail from Doan Trevor rimfire prone stock (Fiddleback Walnut) with Stiller 2500 X Action.
Contact Doan Trevor
